Dear Paul, You seem like a real expert. Hopefully you'll get this message and will be able to help me out. I have a Compaque Presario F700 and use Windows 7. All of a sudden I am having an issue with the sound. The computer tells me that ther is no audio output device installed and it is detecting problems with the hardware, which is strange because it worked just fine for the past four years. I have also checked and found that there is no sound card installed. I am not quite sure what to do because I am definately not techy.

I just know what is considered the basics, but I did read on another forum that this is not a unique issue. I was hoping to get some advice without having to $30/mth. Would really appreciate any advice.

Thanks, Deborah. Hi, Deborah: Thank you for the compliment. I do not consider myself an expert by any means. But I try to help folks where I can. Your issue is rather a difficult one to diagnose over the internet, unfortunately.

The problem being, it was working fine for years, and now all of a sudden, for some unforeseen reason, it isn't. Not only that, but now your audio controller has completely disappeared from sight. So, here are my recommendations for you: 1. Launch the system restore utility, and select a restore point to a time when your audio was functioning normally. It is possible something got real gummed up in the registry. If that doesn't work, consider backing up all of your files and re-installing Windows 7 fresh and clean. If the above recommendations don't work, then it is possible that the audio controller on the motherboard has quit on you.

Best regards, Paul. Dear Paul, Dear All, It took some time, but finally im through with all suggested versions from that blog. And well, nothing really worked.

I tried to edit and to manual install SP34789 and SP30399 just as proposed. Trying the manual installation, in the end no driver was identified at all (not even one that only works for 3 seconds). One strange thing was, that when updating the inf-file at this, the pc told me it couldn’t find it – although I just told it where it is (C: SWSetup SP30399).

Interestingly, modifying the sp30399 worked for some few hours (in total). Witech Diagnostic Application Software Download. But i dont know why. - as far as i can see, you recommended that before (above) and i already did try that (with the only difference: now i did run the file as the admin).

Im not so sure, but think i didnt update the driver, but installed it completely new again (manually, with the modified file). I did that because in the device-manager suddenly (probably after that first error-installation) my audiocontroller was missing completely. But actually im totally in the dark, specially since i couldnt repeat that, trying all versions of installing that came to my mind. (with the result, that it didnt start anymore and i needed a system-recovery.

Maybe due to its year of birth 2004, my mechanical friend has some other serious problems preventing success.but no, i wouldnt know what!) so, basically nothing worked. Thanks so far! Hi, Helga: I have one last suggestion.I read somewhere on the internet that all you need to do is to manually install the XP Pro driver for your notebook. It sounds too good to be true, but several people thanked the person that recommended doing that, and they all said it worked.

So, download this driver. Let it fail or give an error. Then click on your audio controller in the device manager.

Click on the driver tab. Telugu Hero Suman Mp3 Songs Free Download on this page. Click on update driver. Select the 'Browse my computer for software' method, and browse to C: SWSetup sp30157. Make sure the include subfolders box is checked and pray it works. Good luck, Paul.

Solved: Dear all, I am an user of HP Pavilion dv1000 (PR428UA#ABA) Notebook. Conexant Audio Driver for Windows 7 -- nx9005.

Hey, so i had a partly success, with the result of a failure! I could not install the original xp-driver. No success, no nothing. Then i modified the according inf, with my hardware-IDs. And that worked! - that means, i got a formal installation success and had to restart the computer to complete the installation. Well and during starting up came a blue screen and i had to recover the system.

Recovering went well, only the installation was redone. Tried the installation again - with the same result.

More and more i have the feeling its not only software thats missing, but a working pc. Wellwellwell h. Hi Paul and Helga, I faced the same issue with my Compaq NX9005 after upgrading to Win7. I have applied the edit suggestion Paul gave and it worked perfectly even before any restarting. The edited portion of the qta3091.inf file became: [Manufacturer]%MfgNameLong%=Conexant [Conexant]%*WDM_AMCAUD.DeviceDesc%=WDM_AMCAUD,PCI VEN_1002&DEV_4370&SUBSYS_3091103C%*WDM_AMCAUD.DeviceDesc%=WDM_AMCAUD,PCI VEN_10B9&DEV_5451&SUBSYS_0024103C&REV_02 [ControlFlags] ExcludeFromSelect=PCI VEN_1002&DEV_4370&SUBSYS_3091103C Thanks a lot!!

I had problem also with the LAN interface. I used a USB lan adapter to get access to the internet and downloaded the XPdriver at HP site and after installation the LAN worked fine also.

Hi: Unfortunately, the nx9010 is not capable of running all of the features of Windows 7. The graphics adapter does not meet the minumum requirements to run Windows 7, so there are no drivers for it. Here is the link to the quickspecs for your PC: You can try to find Windows vista or Windows 7 drivers for missing components from the manufacturer's websites if you are missing devices. If you can connect to the internet, run the windows update program and perhaps drivers will be downloaded for you.

However, you are stuck with the graphics as you see them. OK, let's see what we can narrow down: Try this audio driver for Windows Vista: Do you have a built-in wireless adapter? I only see one ethernet controller listed. Try the XP drivers for your Mini-PCI NIC. I do not believe any Vista drivers exist.

I couldn't find any. Try installing them manually from the device manager if you have to (if the installation fails to load). Click on the device and click on update driver and browse to the SWSetup folder that was created when you launched the installation program. Do the same thing for the modem: Here are the XP drivers. No Vista drivers that I could find.